One of the many services NOVA Stone Care provides is marble floor restoration – honing, polishing buffing and sealing. In this blog post we will dive into the details of this process.
Marble flooring has become a popular choice of flooring in many homes today. It adds style, elegance and beauty to the house. Marble is a natural stone, strong enough to withstand the harshest conditions but over time it can lose its shine.
High traffic and furniture contributes to the scratching and dulling of the marble surface. Cracks and scratches occur in marble regardless of what you do to minimize such mishaps. While marble is a durable stone, it requires a certain amount of care and maintenance. If you clean marble without proper cleaner and equipment you will destroy the finish. General cleaners eat through marble minerals resulting in faded shine. It will cost you money to reverse the damage by fixing it yourself. NOVA Stone Care specialists are pros at marble floor restoration. They can restore your dull, etched, scratched marble floors to its former luster and shine.
NOVA Stone Care specialists use the highest quality diamond floor pads to grind down the surface to expose the fresh layer of stone. At the end of this process, the marble floors achieve a mirror-like or matte finish. Here is the step by step process of honing, polishing, buffing and sealing marble floors used by NOVA Stone Care specialist.
Step -1 Honing
Marble honing is a method of cutting the stone and creating a more even surface. It brings smoothness to the marble floor by removing scratch or etch marks. For this step NOVA Stone Care specialists use the top of the line diamond floor polishing pads in lower grits like 100, 200 and 400. The lower grit diamond floor pads remove the visible scratches. Apart from scratches, honing will also remove certain stains. Once the rough spots are honed away, the marble will have a matte finish. The finish will be very scratch resistant at this point because it is not glossy. In some cases, honing is all that’s needed to get your stone looking spectacular again, especially if you are not looking for a glossy, mirror-like finish.
Step 2 – Polishing
If you want a glossy finish, there’s a step after honing that will create the glossy finish you’re looking for. Polishing brings the stone to a shiny finish. Polishing is done by diamond floor pads with grit 800 and grit 1500. NOVA Stone Care specialists gently polish the surface using a fine grit until it sparkles. For marble floors in a good condition a polishing can be enough to bring back the shine.
Step 3 – Buffing
In this step we polish with the finer grit 3000. At times, crystallize of marble is done for finishing. The crystallization process entails spraying a liquid onto the marble surface and buffing it using steel wool properly fitted under the single disc floor machine of standard weight. It creates a chemical reaction which has a long-term impact on stone durability. This method protects and adds shine to the surface. It creates a sparkly, mirror-like finish.
Step 4 – Sealing
To seal the polished marble floor with a proper penetrating sealant is a crucial step to prevent water absorption. If you don’t seal your marble floors, any bit of moisture leaking through could cause marble to lose its shiny, glossy look. This step is essential for either old marble floor restoration or new marble polishing. We at NOVA Stone Care apply top of the line marble sealer as a final step. We suggest waiting 24 hours for the sealer to cure before stepping on the floors. Check out our project gallery section for more info and pictures.
